Update
nebumind in the News
Our co-founder, Caroline Albert, was recently interviewed by HI:TECH Campus Magazine, the professional journal for graduates of technical faculties.
09/05/2023
Event
Watch nebumind on TV this week
Our Co-Founder Franz Engel will be on TV this week! The Dutch television program “Business in Europe” will broadcast nebumind together with our partner Ceratizit in its newest episode and show, how nebumind and Ceratizit optimize the milling process based on machine data. Make sure, you tune in!
17/12/2022
Update
Review of the AMTC 2021
The Additive Manufacturing Conference 2021, initiated by OC Oerlikon, took place a while ago, but the vision we presented there only got more important by now. Find out why the evaluation of data in 3D printing is crucial in this interview by our co-founder, Caroline Albert.
01/06/2022
Update
Monitoring stability of milling process by comparing successive milling steps
Our latest use case with CERATIZIT shows how the nebumind software can be used to analyse the stability of the milling process. Having machine and sensor data stored and visualized not only temporal, but also spatial, enables a direct comparison of successive milling steps independent of milling speed or trajectory.
12/05/2022
Update
nebumind is featured in Oerlikon’s latest customer magazine
The new issue of Beyond Surfaces customer magazine provides a review of the Advanced Manufacturing Technology Conference in October 2021 and features our co-founder Caroline with her thoughts on the potential of digitization in the AM industry.
26/04/2022
Update
nebumind in the news again – Using sensor data to improve composite parts and processes
Another great article on nebumind in the Composites World magazine. It introduces our software in detail and presents its various applications, which can be used in composite manufacturing environments to reduce production waste and cost.
22/10/2020
Update
nebumind in the news again – “digitalization requires a vision, but not a master plan”
Our Co-Founder Franz has been interviewed by Composites for Europe, one of the leading European trade fairs and forums for innovations in composites, technologies and applications. What Franz told about nebumind, its value for the composite industry and our view on the digitalisation degree of the manufacturing industry in Germany, you can read here.
21/09/2020
Update
New machine interface built for EOS 3D printers
We have performed another integration of our software into an EOS machine used for metal 3D printing together with Ariane Group. Our software can now be easily connected to EOS 3D printers and collect and visualize data as “digital product twins” during manufacture.
18/08/2020
Update
First robot interface built for KUKA robots
We have performed the first integration of our software into a KUKA robot at Fraunhofer IGCV in Augsburg. Our software can now be easily connected to KUKA robots and collect and visualize data as “digital product twins” during manufacturing.
13/05/2020
Event
Franz Engel was a speaker at the “Rosenheimer Symposium for Additive Manufacturing”
Our Co-Founder Franz Engel was a speaker at the “Rosenheimer Symposium for Additive Manufacturing” on Monday, 30th September 2019, in Rosenheim.
04/10/2019
