News - nebumind

EN
DE

Update

nebumind is featured in Oerlikon’s latest customer magazine

Update

Kicking off 2022 with exciting news for EOS users

Update

nebumind in the news again

Event

Visit formnext to see the nebumind software in action at the EOS booth

Event

Visit nebumind at the Space Tech Expo in Bremen

Update

Wrapping up Additive Manufacturing Technology Conference 2021

Event

Join us at the Additive Manufacturing Technology Conference (AMTC)

Event

Join us at Open House Day of Hufschmied Zerspanungssysteme GmbH

Update

Quality 4.0 – why productions need to transform their quality management

Update

Prestigious EU Grant to drive forward the integration of nebumind’s and Authentise‘ software solutions

Update

Quality analysis prior to tape-laying with nebumind’s digital twin

Update

Detecting defect patterns and stopping machine drift

Update

nebumind and Authentise integrate the Digital Twin

Update

The race is on – PLEASE VOTE

Update

Locating thresholds violations to avoid unnecessary waste

Update

nebumind in the news again – Using sensor data to improve composite parts and processes

Update

Same software, different manufacturing process

Update

Catch a first glimpse of our software

Update

nebumind in the news again – “digitalization requires a vision, but not a master plan”

Update

New machine interface built for EOS 3D printers

Update

First robot interface built for KUKA robots

Use Case

Robotic Milling

Use Case

Carbon Fiber Placement

Event

Our Co-Founder Franz Engel was a speaker at the BMWi startup night in Berlin

Use Case

Metal 3D Printing

Event

Our Co-Founder Caroline Legler was a speaker at the InnoSpace Conference in Berlin

All

Use Cases

Updates

Events

Update

Monitoring stability of milling process by comparing successive milling steps

Our latest use case with CERATIZIT shows how the nebumind software can be used to analyse the stability of the milling process. Having machine and sensor data stored and visualized not only temporal, but also spatial, enables a direct comparison of successive milling steps independent of milling speed or trajectory.

read more

12/05/2022

Event

Wrapping up this week’s fairs & events

A week full of exciting events is coming to an end. Read here what nebumind presented on site and what impressions our team took away from the events.

read more

06/05/2022

Update

nebumind is featured in Oerlikon’s latest customer magazine

The new issue of Beyond Surfaces customer magazine provides a review of the Advanced Manufacturing Technology Conference in October 2021 and features our co-founder Caroline with her thoughts on the potential of digitization in the AM industry.

read more

26/04/2022

Update

Kicking off 2022 with exciting news for EOS users

Together with EOS we developed a direct interface between EOS printers and the nebumind software. Data now flows automatically from EOS printers into our software and a digital twin of the printed part builds up.

read more

19/01/2022

Update

Automated report generation with 3D component views and personalized comments

Before heading into the Christmas break, we want to share with you our latest video on our „Reporting“ application. The application helps manufacturers create automatic reports, make individual adjustments, write comments for colleagues, save drafts, and share the final reports with other teams and customers.

read more

16/12/2021

Update

nebumind in the news again

The weekly newspaper VDI Nachrichten has published an article on the nebumind software and its applications and benefits in 3D printing. The full article can be found in the weekly newspaper VDI Nachrichten, issue #45. You can read a summary of the article here.

read more

03/12/2021

Event

Join us during the panel discussion at Formnext Digital Days

Join us on November 30th, 12:30 CET at „Formnext – Where ideas take shape“ Digital Days, where our Co-Founder, Caroline, will talk about „Quality management and digitalization of AM production“ together with Stephan Kuehr from 3YourMind and Céline Deloffre from CEA Tech.

read more

29/11/2021

Event

Recapping formnext 2021

It was not only great to meet again in person, but also to see the progress of the last two years in the AM industry. For those who missed our presentation at the eos booth, find here the video, showing how nebumind detects in the AM chain.

read more

24/11/2021

Event

Visit formnext to see the nebumind software in action at the EOS booth

One week left – formnext 2021 is just around the corner. Visit the EOS booth, where the nebumind software is showcased as part of EOS‘ software workflow, and meet our Co-Founder Caroline, who will be happy to walk you through different applications in Additive Manufacturing.

read more

11/11/2021

Event

Visit nebumind at the Space Tech Expo in Bremen

Our Co-Founder Franz Engel will participate in the Space Tech Expo Europe taking place in Bremen from 16th – 18th of November 2021. You can visit him at the booth of ESA BIC to see how our digital twin software is used for manufacturing analysis of space components.

read more

03/11/2021

Update

Wrapping up Additive Manufacturing Technology Conference 2021

All in all 3.000 attendees during 3 days from 68 countries, 32 partners, 7 startup pitches, 5 workshops and 61 leading speakers from industry, academia and politics. The AMTC 2021, conducted as a hybrid conference, was truly inspiring and a great success with lots of momentum!

read more

20/10/2021

Update

Our first milling application to automate quality control in the milling process

Nowadays the efficiency potential in milling has shifted from the actual milling process to the quality assurance afterwards. Together with our partner Hufschmied Zerspanungssysteme, we transform the previously purely visual quality control of a worker into an automated quality control which is self-learning with every new milling job. Check out our new video!

read more

08/10/2021

Event

Join us at the Additive Manufacturing Technology Conference (AMTC)

Make sure to join us at the Additive Manufacturing Technology Conference (AMTC), one of the most influential C-level events on additive manufacturing. The conference takes place 12th – 14th of October in Aachen this year. As a speaker, our Co-Founder Caroline Albert will pitch the nebumind software.

read more

05/10/2021

Event

Join us at Open House Day of Hufschmied Zerspanungssysteme GmbH

We are excited to be part of the Open House Day at Hufschmied Zerspanungssysteme GmbH on Thursday, 30.09.21, where we will present our inline process and quality control tool for the milling process, a joined development with Hufschmied.

read more

14/09/2021

Update

Quality 4.0 – why productions need to transform their quality management

Quality costs are once again gaining importance in productions: manufacturing processes are becoming increasingly automated, production chains ever more complex and time-to-market schedules ever shorter. Quality management methods that have worked in the past are now reaching their limits. Productions need to transform their quality management into a Quality 4.0 approach. Read about our experiences and why now is the time to act.

read more

07/07/2021

Update

nebumind taking part in a panel discussion at the Applied AI Conference

Yesterday, our co-founder Caroline Albert took part in a panel discussion at the Applied AI Conference, hosted by EIT Manufacturing. If you want to know what the panel had to say on AI in manufacturing, click in the article and watch the stream online.

read more

28/05/2021

Update

nebumind is part of thTHIntegriert lecture series from TH Ingolstadt

Christoph Braun, from our Application Engineer Team, has given a lecture at TH Ingolstadt on „The power of data and the challenges in manufacturing“.

read more

21/05/2021

TH Ingolstadt_nebumind_lecture

Update

Prestigious EU Grant to drive forward the integration of nebumind’s and Authentise‘ software solutions

We are happy to announce, that nebumind and Authentise have won the prestigious EU Grant Digifed to strengthen their partnership and drive forward the integration of the nebumind software and Authentise‘ MES software.

read more

14/05/2021

Update

nebumind featured in staff magazine of Airbus

Being part of the Ludwig Bölkow Campus near Munich, nebumind is looking forward to exploiting different application possibilities with Airbus.

read more

13/04/2021

Update

nebumind is featured in the „innovation of the week“ series of the BDLI

The article of the BDLI (German Aerospace Industries Association) gives great insights into nebumind’s mission – have a read!

read more

25/03/2021

Update

Quality analysis prior to tape-laying with nebumind’s digital twin

Together with partners from industry and science, nebumind is part of an innovative project, „TapeCheckSim“, which is funded by the Federal Ministry for Economic Affairs and Energy of Germany. The project focuses on automating composite manufacturing further by controlling manufacturing quality even before the actual process starts – reducing quality defects, expensive repairs and manual inspections.

read more

10/03/2021

Update

Detecting defect patterns and stopping machine drift

Check out our new video showing you how to compare multiple components, detect defect patterns and prevent machine drift with the nebumind software.

read more

03/03/2021

Update

Industry 4.0 podcast with nebumind

Check out the new podcast of Munich Startup talking about Industry 4.0 and 6 Munich based startups in this field. If you want to know what MunichStartup says about nebumind, tune in for minute 16!

read more

11/02/2021

Event

Our Co-Founder Caroline Albert was a speaker at the EIT Manufacturing Summit 2020

Caroline Albert was part of a panel discussion on “green & resilient manufacturing” together with Daria Tataj, Founder & CEO, Tataj Innovation, Thomas Hahn, Chief Expert Software at Siemens AG Germany and Maurizio Gattiglio, Chairman of Manufacture ETP.

read more

14/12/2020

Event

Join us at the EIT Manufacturing summit

Our Co-Founder, Caroline, takes part in the EIT Manufacturing Summit 2020 on December 10 talking about how Europe’s manufacturing industry can contribute to creating a greener, more digital and competitive Europe.

read more

04/12/2020

Update

nebumind and Authentise integrate the Digital Twin

Big news for our 3D printing applications – nebumind intergrates its software into the MES system of Authentise to give additive users an unparalleled, actionable view of part data.

read more

19/11/2020

Update

The race is on – PLEASE VOTE

nebumind together with our co-founder Caroline has been nominated for the #EITaward, honouring innovative entrepreneurs across Europe. Caroline is with nebumind among the nominees of this year. Until 8th of December, you can vote for us on https://eit.europa.eu/eit-awards-2020/nominees/eit-manufacturing-caroline-albert-de.

read more

16/11/2020

Update

Locating thresholds violations to avoid unnecessary waste

We want to share with you our new video, demonstrating our software in a polymer 3D printing process. By locating threshold violations and analysing their impact on part quality, our software helps the operator reduce unnecessary waste.

read more

06/11/2020

Update

nebumind in the news again – Using sensor data to improve composite parts and processes

Another great article on nebumind in the Composites World magazine. It introduces our software in detail and presents its various applications, which can be used in composite manufacturing environments to reduce production waste and cost.

read more

22/10/2020

Update

Same software, different manufacturing process

We want to share with you another video on our software and how it can be used during the Automated Fiber Placement (AFP) process – a composite manufacturing process used to build airplane wings or wind turbine plates.

read more

20/10/2020

Update

Catch a first glimpse of our software

We are excited to give you a first glimpse of our software! Based on the example of a metal part 3D printed by OTTO FUCHS, we demonstrate how our software collects and visualizes manufacturing data to enable fast and simple quality analyses.

read more

02/10/2020

Update

nebumind in the news again – “digitalization requires a vision, but not a master plan”

Our Co-Founder Franz has been interviewed by Composites for Europe, one of the leading European trade fairs and forums for innovations in composites, technologies and applications. What Franz told about nebumind, its value for the composite industry and our view on the digitalisation degree of the manufacturing industry in Germany, you can read here.

read more

21/09/2020

Update

New machine interface built for EOS 3D printers

We have performed another integration of our software into an EOS machine used for metal 3D printing together with Ariane Group. Our software can now be easily connected to EOS 3D printers and collect and visualize data as “digital product twins” during manufacture.

read more

18/08/2020

Update

nebumind is in the news – digital thread vs. digital twin

nebumind has been featured in the Composites World magazine as a new IoT application for composite manufacturing. The article discusses recent developments in the Composite 4.0 field and how IoT companies help with the digital transformation.

read more

02/07/2020

Update

7 questions for nebumind

Our Co-Founder Caroline has been interviewed by Munich Startup, the platform for technology-oriented, innovative startups in and around Munich. What Caroline told about nebumind, you can read here.

read more

09/06/2020

nebumind_founders

Update

First robot interface built for KUKA robots

We have performed the first integration of our software into a KUKA robot at Fraunhofer IGCV in Augsburg. Our software can now be easily connected to KUKA robots and collect and visualize data as “digital product twins” during manufacturing.

read more

13/05/2020

Update

nebumind wins Start?Zuschuss! funding

We are happy to announce, that nebumind is among the winners of the Start?Zuschuss! funding competition. We are thankful for the support to drive innovation in manufacturing, especially during these difficult times.

read more

21/04/2020

Update

ArianeGroup integrating nebumind software

ArianeGroup chooses nebumind’s software to generate “digital product twins” during their metal 3D printing process in order to analyse and improve the quality of their printed components.

read more

07/04/2020

Update

nebumind is in the news: Wolke aus Messdaten

The Süddeutsche Zeitung has published an article on nebumind nicely describing how diverse the applications of our software are in manufacturing.

read more

11/03/2020

Update

New partnership with Fraunhofer IGCV

We are happy to announce our new partnership with Fraunhofer IGCV on artificial intelligence solutions for manufacturing.

read more

18/02/2020

Event

#XHIBITION Batch #6 with XPRENEURS

22 startup pitches, more than 200 guests, a great location and a lot of networking with investors and industrial representatives – this was #XHIBITION Batch #6!

read more

16/12/2019

Use Case

Robotic Milling

The demand for milling robots used in manufacturing and repair has grown over the last decades, proving to be accurate, repeatable and flexible at the same time.

read more

07/12/2019

Use Case

Carbon Fiber Placement

Carbon fibre placement is one of the most advanced methods in carbon composite manufacturing and is used for high-performance, lightweight products, such as airframes.

read more

11/11/2019

Event

Our Co-Founder Franz Engel was a speaker at the BMWi startup night in Berlin

Our co-founder Franz Engel pitched nebumind at the BMWi startup night in Berlin on 10th of October.

read more

15/10/2019

Event

nebumind exhibited at AIRTEC trade fair in Munich

nebumind exhibited at AIRTEC, the international trade fair for aerospace and automotive suppliers, which took place October 14 – 16 in Munich.

read more

07/10/2019

Event

Franz Engel was a speaker at the “Rosenheimer Symposium for Additive Manufacturing”

Our Co-Founder Franz Engel was a speaker at the “Rosenheimer Symposium for Additive Manufacturing” on Monday, 30th September 2019, in Rosenheim.

read more

04/10/2019

Update

nebumind got selected for the XPRENEURS incubator for high-tech startups

New coaches, new network – nebumind got selected for the XPRENEURS incubator for high-tech startups.

read more

28/09/2019

Use Case

Metal 3D Printing

The global 3D printing market is witnessing promising growth driven by the ease in customized product development and rising demand from the end-user industries, such as automotive and aerospace.

read more

12/08/2019

Event

Our Co-Founder Caroline Legler was a speaker at the InnoSpace Conference in Berlin

Our Co-Founder Caroline Legler took part in a panel discussion with Alexander Gerst (ESA astronaut and commander of the ISS), Matthias Hartmann, Lutz Bertling, Andreas Hammer and Oliver Juckenhoefel on the impact of intelligent software in space and beyond.

read more

14/07/2019

Update

nebumind got selected for the ESA BIC program

More funding to chase our vision – happy to announce that we got selected for the ESA BIC program supporting projects with a connecting to the space industry!

read more

08/03/2019